| 翻訳と辞書 |
| Eight-cylinder engine ： ウィキペディア英語版 |
Multi-cylinder engine
''For multiple-cylinder steam engines, see Compound steam engine and Triple-expansion steam engine''
A multi-cylinder engine is a reciprocating internal combustion engine with multiple cylinders. It can be either a 2-stroke or 4-stroke engine, and can be either Diesel or spark-ignition. The cylinders and the crankshaft which is driven by and co-ordinates the motion of the pistons can be configured in a wide variety of ways. Multi-cylinder engines offer a number of advantages over single-cylinder engines, chiefly with their ability to neutralize imbalances by having corresponding mechanisms moving in opposing directions during the operation of the engine.〔Victor Albert Walter Hillier, Peter Coombes, ''Hillier's Fundamentals of Motor Vehicle Technology'', Book 1 (2004), p. 47.〕 A multiple-cylinder engine is also capable of delivering higher revolutions per minute (RPM) than a single-cylinder engine of equal displacement, because the stroke of the pistons is reduced, decreasing the distance necessary for a piston to travel back and forth per each rotation of the crankshaft, and thus limiting the piston speed for a given RPM. Typically, the more cylinders an engine has, the higher the RPM's it can attain for a given displacement and technology level, at a cost of increased friction losses and complexity. Peak torque is also reduced, but the total horsepower is increased due to the higher RPM's attained.
Although there are 1, 3 and 5-cylinder engines, almost all other inline engines are built with even numbers of cylinders, as it's easier to balance out the mechanical vibrations. Another form of multiple-cylinder internal combustion engine is the radial engine, with cylinders arranged in a star pattern around a central crankshaft. Radial engines are most commonly used as aircraft engines, and in basic single-row configuration are typically built with odd numbers of cylinders (from 3 to 9), as odd numbers are easier to balance in this configuration. "Twin-row" or "multi-row" radials are also built, which is basically two or more single-row radials connected front-to-back and driving a common crankshaft. In this "twin row", or "multi-row" configuration, the total number of cylinders will be an even number, although each row still has an odd number. For example, an typical single row radial such as the Wright Cyclone has 9 cylinders. The twin row Wright Twin Cyclone is based on this engine and thus has two banks of 9 cylinders, for a total of 18, an even number.
==Common configurations==
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Multi-cylinder engine」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|